Stinkeye Challenger build....

[Marc W]

Rock guards?

Yep. My own design. I had the Mopar mud flaps before and still got rubber all over the rear. The way the side rolls under behind the tire still exposed the rear quarter. My tires are inside now compared to before but these should work better the way that bottom edge will catch the rubber down low. I think I see a possible offering from Carlin Fab in the works.

 

[1971demon]

Rock guards?

Actually air foils..

 

[Marc W]

Let’s talk water pumps. This just came out from Aeromotive. A direct mount 50gpm electric pump and plate that is a direct bolt up for the 6.2. Just what serious turbocats needed! 🤩. The aftermarket is catching up big time for us 👊

 

[drag racer]

Wow, good on Aeromotive! Would have thought Meziere would have struck first - maybe they have - have not looked recently.

 

[Marc W]

This the one HHP has that fits all Gen 3 hemis?

The 6.2 is different. Nothing fits all the Hemi's.

 

[Marc W]

I don’t see the plate with it, but says it fits all

It’s the plate that is different. The pump is the same but you have to use the 6.2 specific plate.

 

[GBLWRMR]

@Marc W the car is amazing. Incredible build. And I love the rubber guards for the rears. Growing up my dad was in the GN scene and a few of the top cars nationally had similar. Super memorable. Thanks for sharing!

 

[Marc W]

Update on where the noise will be coming from.. 😎

 

[covidcommander]

Update on where the noise will be coming from.. 😎 View attachment 164348 View attachment 164349 View attachment 164350 View attachment 164351

Guessing there's no mufflers

 

[Marc W]

Came up with a nifty bolt-on support for the Maven mounts directly under the turbos. That solidly supports the turbos so there’s no stress on the hot side piping. Just the cold side left and it’s done.

 

[Unholy707]

That’s super slick! That for the radiator support?

 

[Marc W]

That’s super slick! That for the radiator support?

The factory radiator support was replaced with that bar to support the turbos. It will also support the small radiator we will be using.

 

[Under-Pressure]

Excellent fabrication front to back on this car!

 

[Marc W]

Hot pipes are DONE. I’ll be there Monday morning to start on the cold side. Everything should be finished by the end of the week. I like this. Understated 😎

 

[Marc W]

Sometimes you need to make a bracket to put something where you need it. Brackets can be cool if done right. In this case.. fuel pumps and really big fuel filters. Real Racecars need cool brackets. 😎

 

[fumanchu182]

Yea for when you have enough fuel to go to the moon. 🤣

 

[Marc W]

What I want pics of is the fire suppression system

I have a 10 lb Safecraft system with four nozzles. Two of the nozzles (trunk and rear seat area) are heat activated. Two are manual activation in the engine compartment.

 

[Marc W]

Laid it out with Jason (Carlin Fabrication) yesterday and just like that……. 🤓

 

[Marc W]

Street car 🤓

 

[jgilj]

When is the killer gonna be at the track? I know the million dollar question right?