How-To: Rebuild Front Two Piece Rotors.

[BULL]

The torque info I used was supplied by DBA. 13 Nm = 115 inch/lb or 9.5 ft/lb.

Somewhere in my collection of tq values I have one that's actually a "tq to xx value and then turn xx degrees", like a torque to yield type bolt!

 

[MiHiHemi]

Somewhere in my collection of tq values I have one that's actually a "tq to xx value and then turn xx degrees", like a torque to yield type bolt!

Pretty sure they don’t need that much attention. Only looking for a nice consistent torque all around I think.

 

[BULL]

Personally, I use 120lb-in on H-bobbins, and 60lb-in on D-bobbins (10lb-ft & 5lb-ft)

I also think it's important to use a 1/4" drive tq wrench too, with good technique.

 

[Diboblo]

Happen to have a link by chance?

Looked for it yesterday, but came up empty....

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mMN7ZPG

Sent from my SM-G955U using Tapatalk

 

[McLovin]

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mMN7ZPG

Sent from my SM-G955U using Tapatalk

Awesome. Thank you!

 

[BULL]

Awesome. Thank you!

Not considering the source, that's far better than I can produce them for.

 

[McLovin]

Not considering the source, that's far better than I can produce them for.

Yeah....had to grit my teeth a bit....

 

[Db & Nugs]

Just more shot from chi-na nobody has an American source for the brembo floating bolts do they? Would gladly pay a few bucks more to keep my money in US....

 

[Diboblo]

Just more shot from chi-na nobody has an American source for the brembo floating bolts do they? Would gladly pay a few bucks more to keep my money in US....

Nope. Not yet.

Brembo used to sell them, direct. No longer available.

I mean... I get it. Totally.

Keep is posted, if you find a legit stateside supplier.

Sent from my SM-G955U using Tapatalk

 

[BULL]

Nope. Not yet.

Brembo used to sell them, direct. No longer available.

I mean... I get it. Totally.

Keep is posted, if you find a legit stateside supplier.

Sent from my SM-G955U using Tapatalk

They still will, but only as a repair item, they also will only sell a limited amount to each person.

I'm not sure what they're charging or what the quantity limit is.

 

[Diboblo]

Went through my bookmarks:

Note: No "U" tension springs:

https://racingbrake.com/ml1/

No telling where these were made.

Sent from my SM-G955U using Tapatalk

 

[BULL]

Went through my bookmarks:

Note: No "U" tension springs:

https://racingbrake.com/ml1/

With "U" tension spring:

https://racingbrake.com/ccm-10/

No telling where these were made.

Sent from my SM-G955U using Tapatalk

I don't think that second link is the HC set, it would seem that the H-bobbin has a REALLY long neck on it????

 

[Diboblo]

I don't think that second link is the HC set, it would seem that the H-bobbin has a REALLY long neck on it????

Right.

Fixed that...

Sent from my SM-G955U using Tapatalk

 

[Db & Nugs]

Interesting. My nuts are the other way around...and no jokes guys

View attachment 46736

Hey @MiHiHemi I love those rotors and have been looking for them for my DD. I had a member from DD.net give me a pair of the front aluminum hats now I'm looking for the rotors. Any chance you have a model number or part number. I'm putting them on a 2021 DD tow n go which has the brombo big brake package just came with 1 piece rotors originally.

 

[MiHiHemi]

Hey @MiHiHemi I love those rotors and have been looking for them for my DD. I had a member from DD.net give me a pair of the front aluminum hats now I'm looking for the rotors. Any chance you have a model number or part number. I'm putting them on a 2021 DD tow n go which has the brombo big brake package just came with 1 piece rotors originally.

Here’s all I have handy...

 

[Db & Nugs]

Here’s all I have handy...

View attachment 83610

Thank you for the info

 

[Wizza]

new hardware is available from www.knsbrakes as well which is what I used recently when installing the DBA T3 5000 rings to my front hats

 

[Diboblo]

Hardware here, too:

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mKXoxJ6

Sent from my SM-G666 using Tapatalk